OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2D4E

Hybrid/EV Battery Pack J Over Temperature

P2D4E marks overheating of section J, the tenth separately judged part of a sectioned pack; its ageing counterpart is P2CCF. No manufacturer documents P2D4E publicly. The useful first step is to compare the temperatures of section J with those of its neighbours in live data. If only one sensor stands out while the others agree, a drifting sensor is more likely than real heat; GM's eAssist controller in table 13OBDG05C runs that kind of check under P0A9C, flagging a sensor that differs from the battery average by more than 8.55 °C, Type B. If the whole section is warm, look at its cooling and its modules. CARB asks for both: monitored temperature inputs and a working cooling system. Power is reduced until the reading drops.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / 4E

Possible causes

  • One temperature sensor in section J drifting high while neighbours read normal medium
  • Restricted cooling of section J medium
  • Worn modules in section J (check P2CCF) low

Symptoms

  • Warning light with reduced electric power
  • Section J temperature clearly above its neighbours in live data
  • Charging limited

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2D4E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication