P2D4D
Hybrid/EV Battery Pack I Over Temperature
P2D4D is meant for section I, the ninth subdivision of a battery that is supervised section by section; no published battery has that many monitored groups, and no manufacturer documents the code. Where it is used, the reaction depends on how much margin the controller keeps. GM's 2019 table 19OBDG01 is an example of a tight setting for the whole pack: P0A7E fails once the hottest reading exceeds 54 °C for 5 s within a 6.3 s window, Type A. Fast charging, towing or long climbs in summer are the usual moments when such a limit is reached. CARB requires battery temperature inputs and cooling to be monitored. The battery management first lowers charge and discharge current; only if that does not help is a fault stored.
Possible causes
- Heavy charging or discharging current (fast charging, towing, climbs) beyond cooling capacity medium
- Reduced cooling at section I medium
- Temperature sensor of section I reading high low
Symptoms
- Charging power drops sharply during fast charging
- Reduced drive power with warning message
- Check engine or EV system light
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2D4D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.