OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2D4C

Hybrid/EV Battery Pack H Over Temperature

P2D4C stands for overheating of section H, the eighth monitored portion of a traction battery. Eight sections is also the largest split found in public service information, the Audi Q5 PHEV with groups 1 to 8, so H marks the edge of documented practice; Audi publishes only the ageing code P2CCD00 for its group 8, and no manufacturer documents P2D4C. Before suspecting the modules, look at the cooling system as a whole: CARB requires a functional check of battery cooling, which surfaces as separate cooling-performance codes such as P0C32, P2D3F and P2D40. If these are set too, the cause is the loop, not section H. GM's plug-in table 16OBDG02 shows a typical pack limit of 72 °C, 80 of 100 samples, Type A. Power drops until it cools.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / 4C

Possible causes

  • Battery cooling loop fault (low coolant, pump, chiller, valve) affecting section H high
  • Local flow restriction or poor cold-plate contact at section H medium
  • Worn module in section H (see P2CCD) low

Symptoms

  • Warning lamp and possibly further battery cooling codes
  • Limited acceleration in electric mode
  • Charging stops or slows down

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2D4C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication