P2D4B
Hybrid/EV Battery Pack G Over Temperature
P2D4B reports overheating in section G, the seventh separately supervised part of the traction battery. Such a letter only makes sense for big packs with many groups. The Audi Q5 PHEV is a documented example of such a split: its hybrid battery unit 008C reports eight battery groups through the deterioration codes P0A7F00 to P2CCD00, group 7 being P2CCC00, and Audi bulletins 2076982/1 and 2079556/1 of 2025 deal with replacing single modules. Those bulletins cover ageing only; no manufacturer documents P2D4B. For battery components such as cells and temperature sensors, CARB requires codes that isolate the smallest unit replaceable in service. Before a module is changed, the cooling circuit for section G should be checked, since overheating alone is not proof of a worn module.
Possible causes
- Insufficient cooling of section G (coolant distribution, trapped air, pump) high
- Worn module in section G (compare with P2CCC) medium
- Temperature sensor of section G reading too high low
Symptoms
- Engine or hybrid warning lamp
- Displayed electric range shorter than usual
- Reduced charging power
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2D4B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.