OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2D49

Hybrid/EV Battery Pack E Over Temperature

P2D49 says that section E, the fifth separately monitored part of a traction battery, is hotter than permitted. One trap with every pack over-temperature code is heat produced after the car has been switched off. Subaru's 2014–16 Crosstrek Hybrid illustrates it: bulletin 11-185-18 explains that the battery warms itself slightly by self-discharge after shutdown, the original controller logic allowed too little for this, and motor assist, regeneration and auto start-stop then stopped working under P0A7E; reprogramming solved it without a new battery. No manufacturer documents P2D49 publicly. CARB calls for monitored battery temperature inputs and cooling. A code that only appears after parking with no other finding hints at software.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / 49

Possible causes

  • Battery controller logic or threshold too strict for normal post-shutdown warming (software update) medium
  • Reduced cooling of section E (coolant flow, fan, duct) medium
  • Parking in strong sun or heat after hard use medium

Symptoms

  • Hybrid warning light, sometimes only after the car has stood
  • Motor assist and regeneration unavailable
  • Auto start-stop no longer works

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2D49

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication