OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2D48

Hybrid/EV Battery Pack D Over Temperature

P2D48 is the over-temperature code for the fourth section, D, of a sectioned high-voltage battery. Before treating it as real heat, a technician should ask whether the temperature value itself can be trusted. Porsche's 2025 911 GTS T-Hybrid shows why: P0A7E00 was stored together with a thermal run-through code and a red fire warning that blocked starting, yet no hot surface or smell was found; a software condition interrupted communication inside the battery, so its sensors sent implausible values. No manufacturer documents P2D48 itself. CARB requires battery temperature sensors to be monitored as inputs, and genuine sensor faults normally carry their own codes. Real overheating of section D limits power and charging.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / 48

Possible causes

  • Implausible temperature data from the battery electronics (internal communication or software fault) medium
  • Insufficient cooling of section D (coolant flow, pump, chiller, air path) medium
  • Genuine cell overheating in section D due to an internal cell defect low

Symptoms

  • Hybrid system or battery warning, possibly a fire hazard message
  • Vehicle may refuse to start or enter drive-ready mode
  • Reduced electric power and charging

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2D48

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication