OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2D47

Hybrid/EV Battery Pack C Over Temperature

With P2D47 the battery controller reports that the third section of a divided traction battery, C, has exceeded its temperature limit. Because neighbouring sections share the same coolant or air supply, a fault confined to one letter usually points to a local cause: a blocked cooling channel, a cold plate that lost contact with its modules, or an air duct obstructed in that area. No manufacturer documents P2D47 publicly. For whole-pack overheating GM's 2011 Chevrolet Volt used P0A7E with a module limit of 73.5 °C, 50 failures in 60 samples, Type A, and skipped the test while a temperature sensor rationality fault was active. California's rule also expects the cooling performance of the battery to be verified. Expect reduced power until the section cools.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / 47

Possible causes

  • Blocked cooling channel or air duct serving section C high
  • Poor thermal contact between section C modules and the cooling plate (missing or displaced thermal paste/pad) medium
  • Temperature sensor in section C reading high low

Symptoms

  • Check engine or hybrid system warning light
  • Less electric power, especially after longer drives
  • Battery cooling fan or pump running at high speed

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2D47

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication