P2D46
Hybrid/EV Battery Pack B Over Temperature
P2D46 extends the pack over-temperature check to a battery that is split into several separately watched sections: section B has run hotter than its protection limit, while section A, on undivided batteries the whole pack, uses P0A7E. No manufacturer documents P2D46 publicly. GM shows how the parent code works: its 2019 table 19OBDG02 takes the hottest module reading and fails above 65 °C in 80 of 100 samples at 100 ms, Type A, so the MIL comes on after one trip. A divided pack would run that comparison per section. CARB asks for monitored battery temperature inputs and a functional check of battery cooling. The car usually cuts charge and drive power until section B cools down.
Possible causes
- Restricted coolant or air flow through section B (blocked channel, kinked hose, clogged intake) high
- Sustained high load or repeated fast charging in hot weather medium
- Temperature sensor in section B reading too high without a circuit fault medium
- Aged modules in section B with raised internal resistance low
Symptoms
- Hybrid or EV system warning and check engine light
- Reduced electric drive power and regeneration
- Charging slowed or interrupted
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2D46
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.