OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2D44

A/C Compressor Motor Performance

P2D44 is the overall function check of the electric A/C compressor motor: it is commanded to run but does not deliver what is expected, typically a speed feedback that does not follow the request, while no single voltage or current fault is flagged. No manufacturer documents P2D44 on an official public source. GM runs the comparable test under its own code P1F0A, Type B: the 2011 Volt fails it when the spinning motor stays below 1800 rpm for 20 s; the 2019 tables filter the gap between requested and reported speed across a request range of 960 to 8,600 rpm. A rotor that does not turn at all has its own code, P2D29. Causes include internal wear, too little refrigerant or oil, excessive head pressure and controller faults. Cooling becomes weak or stops.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / 44

Possible causes

  • Internal mechanical wear or lack of oil in the compressor high
  • Wrong refrigerant charge or excessive high-side pressure medium
  • Fault in the compressor inverter or its speed evaluation medium

Symptoms

  • A/C cools poorly or not at all
  • Unusual noise from the compressor
  • Battery cooling restricted on plug-in hybrids and EVs

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2D44

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication