P2D43
A/C Compressor Motor Voltage B High
With P2D43 the controller reports that compressor motor voltage B has climbed above the level its power stage can withstand; the compressor controller normally stops the motor to protect its transistors. No manufacturer documents P2D43 on an official public source. GM's hybrid tables show how the voltage A side is treated: the 2011 Volt logs a single sample of 480 V or more as P1ECA, while the 2016 tables classify a reading above 527.25 V as out of range under P0D6A, each Type B. Real overvoltage is rare because the battery holds the bus steady; spikes during charging or regeneration, a faulty converter or charger, or a wrong measurement inside the compressor are more likely. The A/C cuts out; repeated cases call for a check of the high-voltage system.
Possible causes
- Faulty voltage measurement in the compressor control module high
- Voltage spikes on the high-voltage bus during charging or regeneration medium
- Faulty DC/DC converter or on-board charger low
Symptoms
- A/C switches off, sometimes only for a while
- Hybrid or EV system warning
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2D43
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.