OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2D41

A/C Compressor Motor Voltage B Performance

P2D41 is a plausibility check on the second voltage value that an electric A/C compressor reports for its motor drive: the reading is electrically valid but disagrees with a reference, for example the traction battery voltage or the first compressor voltage value. Which voltage the letter B stands for is up to the manufacturer; no manufacturer documents P2D41 on an official public source. GM shows the principle for voltage A in the Volt: P0D69 compares compressor input voltage with the pack voltage and fails above a 15 V gap (2011) or 30 V (2016), Type B. California only demands such monitoring where the compressor serves battery cooling or engine control. Low and high signal: P2D42, P2D43.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / 41

Possible causes

  • Faulty voltage measurement inside the compressor control module high
  • Contact resistance at the high-voltage connector of the compressor medium
  • Implausible reference value from the battery or hybrid control module low

Symptoms

  • Hybrid or EV warning message, warning lamp depending on the manufacturer
  • A/C cooling reduced or switched off

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2D41

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication