P2D3F
Hybrid/EV Battery Cooling System B Performance
P2D3F is the functional check of a second cooling path of the traction battery, alongside A (P0C32) and C (P2D40). Which path carries which letter is the manufacturer's choice; packs may be cooled by air, by a coolant radiator or by a refrigerant chiller, and some switch between them. No manufacturer documents P2D3F publicly. CARB requires a cooling performance check where feasible, and published tests show the principle: GM's 2012 Volt fails its battery cooling check under P0C32 when the average pack temperature stays above 40 °C during active cooling, Type A. Ford, which uses letter C for the chiller path of its Explorer and Aviator hybrids, tests that path by commanding maximum chiller flow and expecting the inlet coolant to fall by 3 °C. Expect reduced power or charging when the pack runs hot.
Possible causes
- Low coolant or trapped air in the battery loop high
- Blocked radiator, cooler or air duct of this cooling path medium
- Diverter valve or pump that does not route enough flow through path B medium
- Coolant or cell temperature sensor reading wrong low
Symptoms
- Malfunction indicator lamp or hybrid system warning on
- Reduced electric power or slower fast charging in hot weather
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2D3F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.