P2D31
Intake Manifold Tuning Valve Exceeded Learning Limit Bank 1
An intake manifold tuning valve switches the effective volume or length of the intake to use pressure waves for more cylinder filling. Electrically positioned versions learn the feedback value at their end stop, and P2D31 says that learned value lies outside its tolerance band. GM uses the code on the 2023 and 2024 Corvette Z06 with the 5.5 l LT6, whose two plenums are linked by three servo-driven communicator valves. Tables 23OBDG07 and 24OBDG07 average the feedback voltage of tuning valve 1 at the closed stop and fail it above 4.5 V or below 4.25 V for 1 s, battery 9 to 17.5 V, with P2076 to P2078 and P0660 absent; MIL after two trips. Tuning valve 2 has its own GM codes. Typical reasons are a worn stop, a bent valve or a drifting sensor; power can suffer in certain rev bands.
Possible causes
- Worn end stop or deposits changing the closed position of the valve high
- Bent valve plate or shaft after mechanical stress medium
- Position sensor inside the actuator drifting medium
- Actuator replaced without completing the relearn low
Symptoms
- Check engine light
- Less torque in some engine speed ranges
- Changed intake sound under load
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2D31
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.