P2D30
Cold Start Turbocharger/Supercharger A Overboost
P2D30 is the opposite of P2D2F: during the cold start strategy, boost from turbocharger or supercharger A rose above the permitted value. Outside that phase P0234 covers it. CARB lists electronic wastegate position as a cold start feature that has to follow its command, so a gate that stays shut when the strategy wants it open is the classic trigger. No manufacturer documents P2D30 publicly. For the related wastegate check GM's 2019 table for the 2.7 l L3B fails P2C9B when position error exceeds 20 % for more than 1 s under cold start conditions, Type A. GM bulletin 22-NA-002 (Equinox and Terrain 1.5 l) shows how cold causes boost faults: frozen oil and water in the wastegate regulator solenoid and ice inside the intercooler set P0234 or P0299. The module usually cuts power to protect the engine.
Possible causes
- Wastegate flap or linkage stuck closed or stiff in the cold high
- Wastegate regulator solenoid blocked by frozen moisture or oil deposits medium
- Electric wastegate actuator or its position feedback faulty medium
- Boost pressure sensor reading too high low
Symptoms
- Sudden power reduction shortly after starting in the cold
- Check engine light, sometimes with P0234 or a wastegate code
- Unusually strong surge of power while the engine is cold
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2D30
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.