OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2D2E

Cold Start Intake Manifold Runner Performance Bank 2

P2D2E is the bank 2 version of the cold start runner check, so it only appears on V or boxer engines whose second cylinder row has its own flaps or actuator. The module compares the position commanded for the cold start phase with the feedback from that bank and flags a flap that stays short of target. Both FCA bulletins for the 2020 Ram 1500 3.0 l EcoDiesel V6 (18-008-21, 18-002-23) list it together with P2D2D, and the cure is a PCM reflash; when both banks report at once, software or a shared supply is more likely than two failing flaps. If only bank 2 is stored, inspect that side's shaft, linkage and connector. CARB demands the check for charge motion and swirl valves during cold starts; outside that window the same fault is P200B.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / 2E

Possible causes

  • Engine control software, especially when P2D2D is stored at the same time high
  • Deposits making the bank 2 flap shaft stiff in the cold medium
  • Bank 2 actuator, linkage or connector worn or corroded medium

Symptoms

  • Check engine light, often with no other complaint
  • Uneven idle shortly after a cold start
  • P2D2D or P200B may appear alongside

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2D2E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication