P2D2A
Hybrid/EV Electronics Coolant Temperature Sensor A/B Correlation
Some drives measure the coolant of the inverter and power electronics loop at two points. After a long rest both should read nearly the same, so P2D2A records that sensors A and B disagree by more than the allowed margin; the code does not say which one is wrong. No manufacturer documents P2D2A publicly. GM's 2019 hybrid tables run the idea with one sensor and other references under P0CEF: after at least 3,600 s with compressor, pump and propulsion off, the electronics coolant reading must stay within 27 °C of outside air or transmission fluid, or 28 °C of a refrigerant-based value (Type B). CARB requires inputs of inverter thermal management to be monitored.
Possible causes
- One of the two sensors has drifted high
- Added resistance in a connector or wire shifting one reading medium
- Air pocket at one sensor after coolant service medium
- Replacement sensor with a different characteristic low
Symptoms
- Hybrid or EV system warning
- Electronics coolant pump runs more often or at full speed
- Possible power reduction to protect the inverter
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2D2A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.