OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2D29

A/C Compressor Motor Stalled

Hybrids and electric vehicles drive the A/C compressor with its own high-voltage motor and inverter. P2D29 reports that this motor is commanded to turn but does not rotate. No manufacturer documents P2D29 publicly. GM's 2019 hybrid tables cover a related check under its own code P1F0A: the filtered gap between commanded and fed-back compressor speed must stay inside limits while 960 to 8,600 rpm is requested, high-side pressure is below 2,800 kPa and pack voltage above 270 V; failure is Type B. A Tecumseh patent explains why current alone misses a stall and why high head pressure right after shutdown can hold the rotor. Without the compressor, cabin and often battery cooling are lost.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / 29

Possible causes

  • Mechanically seized compressor, often after oil loss or refrigerant leak high
  • Fault in the compressor's integrated inverter or phase output medium
  • Restart against high head pressure or overcharged system medium
  • High-voltage supply to the compressor interrupted or weak low

Symptoms

  • Air conditioning blows warm air
  • Warning about reduced battery cooling or charging power
  • Compressor phase current or overload codes stored alongside

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2D29

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication