OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2D27

Coolant Pump F Control Circuit Performance/Stuck Off

P2D27 is the functional check for coolant pump F, the sixth auxiliary pump in the lettering scheme and thus only relevant on vehicles with very many electric pumps, typically plug-in hybrids, electric vehicles or heavy diesels with several separate loops. The control line answers, yet the pump stays off or falls short of what the module expects from speed, current or temperature response. No manufacturer publicly documents P2D27, and unlike pump E no further pump F fault codes appear in common code lists. Published logic exists only for siblings: GM's 2025 diesel table judges pump C (P2C48) by comparing phase current with speed above 2,800 rpm, 10 failures out of 12, type B. Ford's 2024 gasoline summary watches its pumps A and B (P2601, P261B) for 5 s from 11 V. Check the loop, then pump and wiring.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / 27

Possible causes

  • Pump F blocked or worn so it runs too weakly high
  • Air pocket or low coolant in the circuit of pump F medium
  • Corroded connector or high resistance in the pump F supply medium

Symptoms

  • Malfunction indicator lamp on
  • Overtemperature in the component or loop served by pump F
  • Power limitation if the cooled component protects itself

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2D27

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication