OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2D26

Coolant Pump E Control Circuit Performance/Stuck Off

P2D26 belongs to the general auxiliary coolant pumps, not to the motor electronics family above: pump E is the fifth electric pump of a vehicle, and its assignment (low-temperature loop, charge air cooler, turbo or component cooling) depends entirely on the manufacturer. The code says the control circuit is intact but the pump does not run or does not deliver the expected effect. No manufacturer publicly documents P2D26. GM's diesel tables show the method on pump C (P2C48): they compute the phase current expected at the measured speed and set a type B fault after about 5 s outside the window. Ford's 2024 summary handles performance/stuck off (fault type 92) for its pumps continuously above 11 V. A seized rotor, air, a weak motor or wiring resistance are typical. Electrical faults on pump E have their own codes from P2DF4.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / 26

Possible causes

  • Pump E seized or mechanically worn so it does not reach its target high
  • Air or low coolant in the loop served by pump E medium
  • High resistance in connector, feed or ground of pump E medium
  • Control module software requiring an update low

Symptoms

  • Malfunction indicator lamp on
  • Higher temperature in the circuit cooled by pump E
  • Possible reduced power, depending on what pump E cools

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2D26

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication