P2D23
Turbocharger Interstage Pressure Sensor A Circuit Low
P2D23 says the interstage pressure signal sits below the lowest voltage a working sensor can produce. Typical causes are a signal wire shorted to ground, a lost 5 V supply or an internal sensor short. No public table gives a threshold for this sensor; for comparison, Ford's 2023 diesels treat a DEF pressure sensor below 0.2 V as circuit low. The sensor itself sits between the two compressors of a series turbo system, as GM's two-stage control patent describes, where its value guides the low-pressure stage. California requires out-of-range checks on every such input. With the value missing, the controller usually falls back to a model and caps boost. A high reading is P2D24.
Possible causes
- Signal wire shorted to ground high
- 5 V reference open or pulled down by another sensor medium
- Sensor shorted internally medium
Symptoms
- Check engine light
- Boost limited, noticeably less power
- Further codes if the shared sensor supply is affected
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2D23
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.