OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2D22

Turbocharger Interstage Pressure Sensor A Circuit Range/Performance

P2D22 flags an interstage pressure reading that is electrically valid but implausible, for instance offset, stuck or out of step with the other pressures. No manufacturer documents a detection rule. A Cummins patent on a two-stage engine shows what plausible means: with the compressor bypass valve open, interstage and charge pressure should be almost the same, about 102 kPa at 600 rpm and 119 kPa at 2,000 rpm; a service test compares both speeds, and if charge pressure and turbo speed check out while a code is stored, the interstage sensor is the suspect. California requires rationality checks for such inputs. A sensor that reads wrong can mislead the boost split between the stages.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / 22

Possible causes

  • Sensor element drifted or offset high
  • Sensor port clogged with oil or soot deposits medium
  • Leak in the duct or intercooler between the stages medium
  • Stage bypass valve stuck, giving pressures the model does not expect low

Symptoms

  • Check engine light
  • Uneven boost build-up or reduced power
  • Possible boost deviation codes alongside

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2D22

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication