OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2D1E

Reductant System Leak Detected - Large Leak

P2D1E is the severe form of the DEF leak verdict: the pump cannot build or hold working pressure because fluid escapes freely, for example from a split or disconnected line. No manufacturer documents this code publicly. GM's 2025 diesel tables catch the same physical result under P20E8, which fails when measured DEF pressure stays more than 63 kPa below its setpoint for 30 s with over 3 litres in the tank (Type A, MIL on the first trip). California requires the reductant delivery system to be monitored, and a leak of this size stops dosing, so NOx conversion collapses. Unlike P2D1D, fluid is often visible as a puddle or wet trail. Most trucks soon start the service countdown toward a speed limit.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / 1E

Possible causes

  • DEF line pulled off or connector not latched after service high
  • DEF line split by ice expansion or road debris high
  • Cracked dosing valve body or blown seal at the exhaust medium
  • Cracked pump module housing in the tank unit low

Symptoms

  • Check engine light and DEF system warning soon after start
  • Puddle or wet trail of DEF under the vehicle
  • Countdown to restricted speed or no restart

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2D1E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication