OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2D17

Exhaust Flow Control Valve C Position Circuit

P2D17 is the catch-all fault for the return signal by which actuator C reports its angle to the engine computer. The signal is missing or unusable, yet it does not fit the clear low or high pattern of P2D19 and P2D1A. The code can only appear where a third flap with its own position output exists. No manufacturer documents P2D17. GM's 23OBDG07 tables illustrate how such returns are supervised: for each of two exhaust valves the period and duty cycle of the PWM signal are read and judged over 4 seconds, under GM codes. Ford reads the state of its two flaps over the PWM line of the smart driver. CARB rules call for circuit checks on such inputs. Begin at connector, pins and ground of actuator C, and compare with the other flaps, which are usually of identical design.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / 17

Possible causes

  • Corroded or loose connector on actuator C high
  • Damaged feedback or ground wire near the exhaust medium
  • Failed position sensor inside the actuator medium

Symptoms

  • Check engine light
  • Flap C held in a default position by the control unit
  • Sound modes partly unavailable

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2D17

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication