OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2D16

Exhaust Flow Control Valve C Control Performance

P2D16 covers the case where flap C passes every wiring test but still fails to follow its command: it moves too slowly, stops short of the target or drifts away from it. No manufacturer documents valve C codes publicly. Ford's handling of its A and B flaps shows the idea. The actuator electronics flag a jammed flap through the PWM return line, and a plausibility test sets the measured against the requested angle. The 2020-2023 summary lumps both under control performance; the 2024 edition breaks them down into subtypes 07 for a mechanical fault, 4B for an overheated actuator and 78 for failed alignment. In bulletin 23-2132 the Mustang flap is driven open and shut in 10 percent steps to locate the problem. Soot or rust on the shaft, a seized bearing, a bent silencer or a tired motor are typical; CARB asks for such functional checks.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / 16

Possible causes

  • Flap shaft seized by soot or corrosion high
  • Worn or overheated actuator motor or gearbox medium
  • Silencer or actuator bracket misaligned after exhaust work medium
  • Actuator not aligned after replacement low

Symptoms

  • MIL on, possibly with an exhaust mode warning
  • Rattle or buzzing from the flap area
  • Exhaust sound no longer matches the selected mode

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2D16

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication