OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2D13

Exhaust Flow Control Valve C Control Circuit/Open

P2D13 tells that the drive circuit of a third exhaust flap, valve C, is open or cannot be evaluated. Such a valve only exists on layouts with more than two controlled flaps, for instance a separate bypass in the rear silencer next to one flap per bank. No manufacturer publishes P2D13 or any other valve C code. Ford's 2020-2024 OBD summaries know only valve A on bank 1 and valve B on bank 2; there a smart driver watches the output all the time and flags an open within about 5 seconds under subtype 13. GM's 23OBDG07 tables run the same open-circuit test on an exhaust valve PWM line, but report it as the valve B code P2BF8 after 4 seconds. Under CARB rules, output components like this need circuit monitoring. A connector left off after exhaust work, a broken wire or an internal open in the actuator are the usual finds.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / 13

Possible causes

  • Actuator connector unplugged or loose after exhaust work high
  • Broken control wire near the hot exhaust or at a bracket medium
  • Internal open in the valve C actuator medium
  • Failed output stage in the control module low

Symptoms

  • Check engine light
  • Flap C stays in its rest position, exhaust sound does not change
  • Message that an exhaust or drive mode is unavailable

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2D13

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication