OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2D0F

Engine Pre-Ignition Above Threshold

Pre-ignition means the charge ignites by itself ahead of the spark, mostly at low engine speed and high load in small turbocharged direct-injection engines. Ford patents describe how such events are found: the knock sensor signal is judged in an early crank angle window against a higher limit than ordinary knock, and a counter per cylinder keeps the history. P2D0F reports that this count has passed its calibrated limit while full power is still allowed. No manufacturer documents P2D0F publicly; Lexus uses its own P1378 on the 8AR-FTS 2.0 turbo, and VW lists the power-limiting sibling P2D10. Typical triggers are low-octane fuel, oil droplets or diluted oil, and glowing deposits. Repeated events can crack pistons, so the cause should be found quickly.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / 0F

Possible causes

  • Fuel with too low an octane rating or poor quality high
  • Oil droplets in the chamber, unsuitable oil or oil diluted by fuel medium
  • Glowing carbon deposits on pistons or valves medium
  • Spark plugs with too hot a heat range or worn electrodes low
  • Engine control calibration that needs a manufacturer update low

Symptoms

  • Check engine light, often after hard acceleration from low speed
  • Sharp knocking or a single loud bang under load
  • Rough running or misfire if a piston has already been damaged
  • Rising oil consumption after repeated events

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2D0F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication