P2D0D
Motor Electronics Coolant Pump C Supply Voltage Circuit
P2D0D flags the supply side of motor electronics coolant pump C: the voltage on its power feed is outside the permitted window or missing. Its counterparts on the command line are P2BD4 (open), P2BD5 (low) and P2BD6 (high), so a technician who sees P2D0D alone should check the fuse, relay, power splice and ground of pump C before touching the signal wire. No manufacturer publicly documents P2D0D. For comparison, Ford's 2019 hybrid summary runs the pump A circuit checks only while system voltage stays between 6 and 19 V, and its 2024 summary lists supply voltage out of range (1C) as an auxiliary pump fault type with an 11 V threshold. CARB requires the electrical monitoring of all inverter cooling outputs. A pump C without a stable feed may stop, so the cooled branch warms and power is limited.
Possible causes
- Poor ground or corroded supply terminal at pump C high
- Blown fuse or faulty relay in the pump C feed medium
- Weak 12 V battery or low DC/DC converter output medium
Symptoms
- Warning lamp on
- Pump C runs intermittently or not at all
- Other voltage-related codes stored at the same time
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2D0D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.