OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2D0C

Motor Electronics Coolant Pump C Underspeed

P2D0C tells you that pump C, the third pump of the motor electronics loop, is turning too slowly for longer than its controller accepts. Compared with P2D0A the rotor is free, and compared with P2D0B the problem is lack of speed, not lack of load: think of a dragging bearing, a partly clogged impeller or filter screen, or a feed that cannot hold its voltage while the motor draws current. No manufacturer publicly documents P2D0C. Ford's 2024 summary separates under-speed (B2) from the other auxiliary pump faults and runs the check for 5 s once the battery has at least 11 V; on pump A, Ford's 2020 hybrids record the same failure as P2D02. CARB requires a functional check of inverter cooling outputs where feasible. Rising component temperatures and reduced power follow.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / 0C

Possible causes

  • Dragging bearing or internal friction in pump C medium
  • Partly clogged impeller or screen in the pump C branch medium
  • Voltage drop on feed or ground of pump C under load medium

Symptoms

  • Warning lamp on
  • Pump C speed below target in live data
  • Higher component temperatures and power limits under load

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2D0C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication