OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2D05

Motor Electronics Coolant Pump B Stuck/Stalled

P2D05 opens the pump B block of the motor electronics series: the second electric pump in the loop that cools inverters and drive-motor electronics is commanded and supplied, yet its rotor does not move. Where a vehicle has two electric drive units, B may be the pump serving the second inverter. A seized bearing, debris after a coolant change, a burnt winding or coolant that froze in a weak mixture can lock it. No manufacturer publicly documents P2D05. Ford's 2024 summary shows the fault type as actuator stuck (71) for its auxiliary pumps, and on pump A the 2020 Ford hybrids store the equivalent P2D00. CARB requires the outputs of inverter thermal management to be monitored. Slow running is P2D07, overspeed P2D06. A stalled pump cuts flow, so derating and warnings follow.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / 05

Possible causes

  • Seized bearing or blocked rotor in pump B high
  • Debris or deposits in the loop after repairs or coolant change medium
  • Failed motor winding or pump electronics unable to start the motor medium
  • Coolant frozen because the antifreeze ratio is too low low

Symptoms

  • Malfunction or hybrid system warning lamp on
  • No pump noise or vibration when the pump should run
  • Rising temperature of the second inverter, power limited

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2D05

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication