OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2D04

Motor Electronics Coolant Pump A Control Module Overtemperature

P2D04 refers to the small electronics built into coolant pump A of the motor electronics loop: its own temperature has exceeded the limit, and the pump usually reports this before cutting back or switching off to protect itself. Heat builds up when the pump works hard against a restriction, runs dry, sits close to a hot component or has an internal electrical fault. Ford's 2019 hybrid summary still lumped such internal reports under P0C73 (confirmed pump fault for more than 1.25 s); Ford's 2020 hybrid campaigns for the Escape (20-2221) and for Explorer, Aviator and the police utility (20-2293, later 20-2345) name P2D04 separately and fix it with a software update once the coolant level is right. Ford's 2024 summary calls the type 98, system overtemperature. If the pump shuts down, the inverter may overheat and power drops.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / 04

Possible causes

  • Pump running dry or with too little coolant, so it loses its own cooling medium
  • Blocked or kinked line forcing the pump to work at high load medium
  • Internal fault in the pump control electronics medium
  • Software strategy on 2020 Ford hybrids, cured by reprogramming low

Symptoms

  • Malfunction indicator lamp on, sometimes only after longer drives or in hot weather
  • Pump stops temporarily and restarts after cooling down
  • Inverter overtemperature warning or reduced power

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2D04

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication