P2D03
Motor Electronics Coolant Pump A Supply Voltage Circuit
P2D03 concerns the power feed of motor electronics coolant pump A rather than its command line: the pump, or the module reading its status, finds the supply outside its allowed window or missing. That points to a blown fuse, a corroded connector, a weak ground or a 12 V system that drops too low. The command-side faults of the same pump are P0A05 to P0A07; Ford's 2019 hybrid summary checks those with 6 to 19 V on the 12 V net. Ford lists P2D03 in the 2020 hybrid bulletins 20-2221 (Escape HEV) and 20-2293/20-2345 (Explorer, Aviator, Police Interceptor Utility hybrid), where reprogramming after a coolant check cleared it. In the 2024 summary the matching pump fault type is 1C, supply voltage out of range. A pump without proper power stops cooling the inverter.
Possible causes
- Blown fuse or faulty relay in the pump feed medium
- Corroded connector, loose terminal or poor ground at pump A high
- Weak 12 V battery or DC/DC converter output too low medium
- Software strategy on 2020 Ford hybrids, cured by reprogramming low
Symptoms
- Malfunction indicator lamp on
- Pump A runs intermittently or not at all
- Further low-voltage codes in other modules
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2D03
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.