P2D02
Motor Electronics Coolant Pump A Underspeed
With P2D02 the controller sees pump A of the motor electronics cooling loop turning, but clearly below its target speed for longer than allowed. The rotor is not locked, which separates it from P2D00; a stiff bearing, deposits on the impeller, cold and thick coolant or a supply that sags under load are therefore more likely than a dead motor. Ford names P2D02 in the 2020 Escape HEV bulletin 20-2221 (BECM) and in the PCM-based bulletins 20-2293/20-2345 for the hybrid Explorer, Aviator and Police Interceptor Utility: with the coolant level confirmed, new software resolved the lamp. Ford's 2024 summary keeps underspeed as a separate pump fault type (B2), checked over 5 s with at least 11 V. Excess speed is P2D01. Less flow lets the inverter warm up and may limit power.
Possible causes
- Stiff bearing or deposits on the impeller of pump A medium
- Control software strategy (Ford 2020 hybrids, fixed by reprogramming) medium
- Voltage drop on the pump feed or ground under load medium
- Wrong, contaminated or aged coolant raising viscosity at low temperature low
Symptoms
- Malfunction indicator lamp on
- Higher inverter or motor electronics temperatures in live data
- Power limitation under sustained load
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2D02
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.