P2D00
Motor Electronics Coolant Pump A Stuck/Stalled
P2D00 reports that coolant pump A of the motor electronics loop, which cools the inverter and drive-motor electronics, does not rotate although commanded. It opens its own series P2D00–P2D0E (stuck, overspeed/air, underspeed, supply voltage and module overtemperature for pumps A to C) and should not be confused with the Hybrid/EV electronics pump codes P2C66–P2C68. Ford uses P2D00 on 2020 hybrids: bulletins 20-2221 (Escape HEV, stored in the BECM) and 20-2345 (Explorer, Aviator, Police Interceptor Utility, stored in the PCM) list it with P2D01–P2D04 and fix it by reprogramming after the coolant level has been checked. Without a software cause, a seized rotor or debris is behind it. Without flow the inverter heats up and the system derates power.
Possible causes
- Battery or powertrain controller software misreading the pump (Ford 2020 hybrids) medium
- Pump rotor or bearing seized high
- Debris jamming the impeller after coolant work medium
- Pump motor or integrated electronics failed low
Symptoms
- MIL on
- Reduced drive power when the inverter gets hot
- Hybrid system warning message
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2D00
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.