OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2CFC

A/C Clutch Control Circuit

P2CFC is the general fault of the output that powers the compressor clutch coil directly, unlike P0645, which covers a clutch relay. Ford is the documented user and runs it in a body module, not the PCM. Special service messages 50811 and 51380 list P2CFC, often with P0645 and P2CFD, in the HVAC module of 2020–2023 Explorer and Aviator; the cause was spread or pushed-out terminals at body control module C, so pins are checked before that module is replaced. SSM 53061 reports P2CFC in the same module on F-150 trucks of 2021–2024 and Super Duty models of 2023–2024 and says voltage left on the clutch field coil while uncommanded is no reason for a new module. Ford's OBD summaries omit the code. The compressor stays off and only warm air comes out.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / FC

Possible causes

  • Spread or pushed-out terminals at the body control module connector high
  • Open or burnt clutch field coil medium
  • Damaged wire or connector between module and compressor medium
  • Faulty clutch output in the controlling module low

Symptoms

  • A/C blows only warm air
  • Compressor clutch does not engage
  • Code stored in the HVAC or body control module, usually without engine lamp

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2CFC

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication