P2CF7
Hybrid/EV Battery Pack Coolant Pump B Underspeed
P2CF7 is the underspeed fault of battery coolant pump B: the pump turns, but clearly below the commanded speed for longer than the controller tolerates. Compared with the stall code P2CF5 the rotor is still moving, so friction, a partly obstructed impeller, coolant that is too viscous in the cold or a sagging supply are likelier than a dead motor. Ford's 2024 summary handles underspeed (B2) as a distinct pump fault type. No manufacturer publicly documents P2CF7; the same fault on pump A, P2CF3, was cleared by reprogramming the battery controller on 2020 Ford hybrids (bulletin 20-2221, Escape HEV). Check supply voltage and ground under load, the condition of the coolant and the pump itself. Battery temperatures may rise and the system may cut power.
Possible causes
- Worn bearing or deposits slowing pump B high
- Supply voltage of pump B dropping under load medium
- Wrong or aged coolant too viscous at low temperature low
- Battery controller software misjudging pump speed low
Symptoms
- MIL or hybrid system warning
- Battery runs warmer than normal
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2CF7
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.