P2CF5
Hybrid/EV Battery Pack Coolant Pump B Stuck/Stalled
P2CF5 means battery coolant pump B does not turn at all although it is commanded and powered: the rotor is blocked, or the pump electronics has given up after failed start attempts. A seized bearing, debris or deposits after coolant work, a failed motor winding or frozen coolant in a weak mixture are the usual suspects. Ford's 2024 summary lists the corresponding pump fault type as actuator stuck (71). No manufacturer publicly documents P2CF5; pump A's equivalent, P0CFF, appears in Ford's 2020 hybrid bulletins 20-2293/20-2345, where reprogramming the battery controller resolved it. If pump B merely runs too slowly, P2CF7 applies; overspeed or air is P2CF6. A stalled pump stops flow through its part of the battery loop, so expect power limits, slower charging and a warning lamp.
Possible causes
- Pump B rotor or bearing seized high
- Debris or deposits jamming the impeller after coolant work medium
- Pump motor or its electronics failed medium
- Coolant frozen due to insufficient antifreeze low
Symptoms
- Warning lamp for hybrid system or engine
- Charging slower or interrupted
- Power reduced as battery temperature rises
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2CF5
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.