OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2CF4

Hybrid/EV Battery Pack Coolant Pump B Supply Voltage Circuit

P2CF4 is about the power feed of the second battery coolant pump, B: the pump or its control unit sees a supply voltage outside the permitted window, or none at all. Unlike the control-circuit codes P0E1A to P0E1C, which watch the command line, this code looks at the line that actually powers the motor, typically a fused 12 V feed plus ground. Ford's 2024 OBD summary handles the matching failure type (1C, supply voltage out of range) for its auxiliary coolant pumps, requiring a battery voltage of 11 V or more before a five-second check. No manufacturer publicly documents P2CF4 itself; the pump A counterpart P0C4B appears in Ford's 2020 hybrid bulletin 20-2345. Without pump B, battery cooling capacity falls, and charging or drive power may be reduced.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / F4

Possible causes

  • Blown fuse or faulty relay in the pump B feed high
  • Corroded connector or poor ground on the pump B supply medium
  • Weak 12 V battery or DC/DC output dragging the supply down medium
  • Internal fault in the pump electronics misreading the supply low

Symptoms

  • MIL or hybrid warning on
  • Pump B silent when commanded
  • Charging or drive power limited when the battery warms up

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2CF4

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication