OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2CF0

Auxiliary Thermostat A Stuck Closed

P2CF0 is the closed-side counterpart of P2CEF: auxiliary thermostat A fails to open, so the circuit it governs gets too little flow and its temperature climbs past the regulating point while other parts of the engine may look normal. No manufacturer documents P2CF0 publicly. The same component is described by Lotus for the four-cylinder Emira, where A is the medium-temperature thermostat and the workshop test checks that the cold piston is retracted and extends in hot water; a unit that never extends would match this code. Wax thermostats usually stick shut when the wax charge leaks or dirt jams the piston. CARB has required monitoring plans since 2019–2021 for systems with several thermostats and temperature sensors. Overheating in that loop is the risk, so it needs prompt attention.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / F0

Possible causes

  • Wax element lost its charge, thermostat no longer opens high
  • Piston jammed by deposits or debris medium
  • Air pocket around the element after a coolant service, so it never sees hot coolant low

Symptoms

  • Engine warning lamp
  • High temperature in one cooling circuit or an overheating warning
  • Possible power reduction to protect the engine

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2CF0

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication