P2CEE
Particulate Filter Pressure Sensor D Circuit Intermittent/Erratic
P2CEE stands for brief dropouts or jumps in the sensor D signal that do not last long enough for the low or high codes. Ford's 2024–25 petrol summary includes it in the continuous analog check of its gasoline particulate filter sensors, about 5 s to register, with no separate threshold given. Ford also lists P2CEE in bulletin 20-2257: 2019–2020 F-150 trucks with the 2.7L EcoBoost built up to 4 July 2020 could light the MIL with this and ten other codes because of PCM software, and the fix was a PCM reprogram (0.3 h labour). So before chasing wiring on such a truck, check the software level. Otherwise the usual reasons are a terminal losing contact under vibration, a chafing harness or moisture in the plug. Sensor C has the matching code P2CE9.
Possible causes
- PCM software setting the code falsely (Ford bulletin 20-2257, F-150 2.7L) medium
- Loose or corroded terminal in the sensor D connector high
- Harness to sensor D chafed or intermittently shorted medium
- Intermittent internal fault of sensor D low
Symptoms
- Warning lamp on, sometimes only now and then
- Pressure value of sensor D jumps in live data
- Possibly stored together with other, unrelated codes after a software issue
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2CEE
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.