OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2CEB

Particulate Filter Pressure Sensor D Circuit Range/Performance

P2CEB says sensor D reports a pressure that is electrically fine but does not match what the exhaust flow should produce. Ford is the only maker found using it, in its 2024–25 petrol summary for engines with a gasoline particulate filter per bank. The functional check starts only after the electrical tests have passed and uses three tests: after shutdown, once inlet gas has been at 250 °C or more for 600 s, an average reading of 16 to 32 hPa fails the offset test; while running, the rationality test fails once readings at or over the pressure predicted from flow add up to 20 s; and a pressure that does not follow a flow change of more than 225 m³/h within 2 s fails the derivative test. Hoses, condensate and sensor drift are the main suspects; P2CE6 is the C counterpart.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / EB

Possible causes

  • Sensing hose to sensor D cracked, kinked or disconnected high
  • Condensate in the sensing line after short trips medium
  • Sensor D drifted or responding slowly medium

Symptoms

  • Warning lamp on
  • Missing substrate test for that bank cannot be completed
  • Usually no noticeable change while driving

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2CEB

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication