P2CEA
Particulate Filter Pressure Sensor D Circuit
Sensor D is the fourth slot for particulate filter pressure and only appears in Ford's 2024–25 petrol OBD summary, which watches a filter on each bank (missing substrate codes P226D and P226E); Ford does not say publicly which letter belongs to which filter or tap. For a digital SENT sensor D, P2CEA covers any circuit failure, monitored without pause with 5 s to register, while lost communication with the same sensor is U0697. GM's 2025 diesel tables stop at sensor C, where P2CE5 is an offset test instead. CARB requires such inputs to be monitored for circuit faults. A damaged connector, a harness melted by exhaust heat or a failed sensor are the likely finds. Without the value, back pressure for that filter is only estimated and the substrate check may not run.
Possible causes
- Damaged or corroded connector at sensor D high
- Harness to sensor D damaged by exhaust heat medium
- Sensor D internally faulty medium
Symptoms
- Warning lamp on
- Particulate filter monitoring for one bank incomplete
- Usually no change in driveability
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2CEA
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.