P2CE9
Particulate Filter Pressure Sensor C Circuit Intermittent/Erratic
P2CE9 catches a sensor C signal that jumps rather than drifts. GM's 2025 diesel tables call this a quick change check: when two consecutive raw samples of the downstream relative pressure sensor differ by more than 20 %, the sample counts as failed, and 99 failures in 200 samples set a Type B code. The test is suspended while cranking and whenever an electrical low or high fault is already present, so it really targets short dropouts. Ford's 2024–25 petrol summary lists P2CE9 within its continuous analog circuit check for gasoline particulate filters, with about 5 s to register and no separate threshold published. Loose terminals that open under engine vibration, a harness rubbing on a bracket or moisture entering the connector are the usual finds; wiggling the harness during live data helps. Sensor D uses P2CEE.
Possible causes
- Loose or corroded terminal in the sensor C connector high
- Harness rubbing through on a bracket or exhaust part medium
- Water entering the connector intermittently medium
- Intermittent internal fault of the sensor low
Symptoms
- Warning lamp on, sometimes after rough roads or rain
- Pressure value jumps in live data
- Fault may disappear and return
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2CE9
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.