OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2CE6

Particulate Filter Pressure Sensor C Circuit Range/Performance

P2CE6 marks a sensor C reading that is electrically valid but physically wrong. GM's 2025 diesel tables use it for a frozen downstream relative pressure signal: during transients, with engine speed changing faster than 150 rpm/s and fuel and airflow also changing quickly, the signal must move; too little variation (25OBDG04B: 0.14 % or less in 40 of 50 samples) sets a two-trip Type B code. Ford's 2024–25 petrol filter strategy runs three checks under P2CE6: an offset test after shutdown that fails at an average of 16 to 32 hPa, a rationality test that fails when the reading stays at or above the flow-based expectation for 20 s in total, and a derivative test over 2 s when exhaust flow changes by more than 225 m³/h. Hoses, condensate and drift are more likely than wiring.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / E6

Possible causes

  • Sensing hose to sensor C kinked, blocked or disconnected high
  • Condensate or frozen water in the sensing line medium
  • Sensor C drifted or sluggish medium
  • Exhaust leak near the measuring point low

Symptoms

  • Warning lamp on
  • Particulate filter regenerations triggered too early or too late
  • Filter monitoring (missing substrate test) cannot complete

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2CE6

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication