OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2CE2

Intake Air Heater C Circuit Range/Performance

P2CE2 is the plausibility test for intake air heater C: the circuit is neither open nor shorted, but current draw, voltage drop or heating effect do not fit the command. Under the heavy-duty OBD rules a glow plug or intake air heater must react properly to commands and its circuit must show plausible current and voltage drop. No manufacturer documents P2CE2 publicly. Volvo and Mack, the only makers seen using heater C codes, list for their pre-heat relay issue the Range/Performance codes of heaters A and B (P2604-7F, P2606-7F) together with the open, low and high codes of heater C, but no C plausibility code. Their repair path still fits: terminal tension, EMS software level, then relay and supply cable. Expect sluggish cold starts and white smoke.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / E2

Possible causes

  • Extra resistance from corroded terminals or a worn supply cable lowering heater current high
  • Pre-heat relay switching with excessive voltage drop medium
  • Heating element C aged, drawing current outside the expected window medium
  • Weak batteries or poor main ground distorting the current and voltage reading low

Symptoms

  • Longer cranking on cold mornings
  • White smoke and rough running until warm
  • Warning lamp without an open or short code for heater C

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2CE2

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication