P2CE1
Intake Air Heater C Circuit/Open
P2CE1 reports an interrupted circuit at intake air heater C, part of the grid-type pre-heat system a diesel uses to warm the incoming air for cold starts. Volvo and Mack use exactly this code on heavy trucks: their 2019 solution K53338075 for 11, 13 and 16 litre engines, including Mack MP7, MP8 and MP10, from US10+OBD13 onwards lists P2CE1-13, the suffix marking an open circuit, among the pre-heat relay codes. It warns that an ohmmeter check of the supply power cable may miss a damaged cable and asks to renew relay and cable together; a 2019 EMS software release also improved relay robustness for these codes. Heavy-duty OBD rules call for circuit continuity checks on intake air heaters. P0543 and P2605 are the open-circuit codes for heaters A and B.
Possible causes
- Damaged supply power cable between relay and heater, not always visible on an ohmmeter high
- Pre-heat relay contacts or output burnt open high
- Poor terminal tension at the heating element or relay plug medium
- Heating element C itself burnt through low
Symptoms
- Hard starting and long cranking in cold weather
- White smoke after a cold start
- Engine warning lamp
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2CE1
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.