P2CE0
Cold Start Cylinder 6 Deactivation/Intake Valve Control Performance
P2CE0 closes this series of cold start codes; numbering ends at cylinder 6 although many deactivation engines have eight cylinders. It indicates that cylinder 6 did not reach the valve state demanded during the cold start routine. No manufacturer documents P2CE0 publicly. Related evidence shows how such faults look in the field: a 2025 Ram bulletin (18-002-25) for the 2023 Ram 1500 with the 5.7 L Hemi MDS eTorque lists cylinder 6 deactivation and reactivation codes (P3441, P1416) with rough idle and misfire during warm-up, and fixes them with new PCM software. GM's L84 marks a cylinder 6 that keeps breathing as P349D, Type B. Look at software and oil supply before replacing lifters; the generic check outside cold start is P3442.
Possible causes
- Engine control software that misjudges or mis-times the cold start switching, fixed by reprogramming medium
- Deactivating lifter or rocker on cylinder 6 not switching high
- Low or delayed oil pressure after a cold start medium
- Cylinder 6 control solenoid or its wiring degraded low
Symptoms
- Rough idle or misfire while warming up
- Check engine lamp, often with a cylinder 6 misfire code
- Cylinder deactivation may stay disabled afterwards
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2CE0
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.