OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2CDF

Cold Start Cylinder 5 Deactivation/Intake Valve Control Performance

P2CDF only occurs on engines with at least five cylinders, mostly V6 and V8 units, and says cylinder 5 did not respond correctly to the cold start deactivation or intake valve command. The Delphi patent behind this idea chooses cylinders that sit farthest from the converter along the exhaust, so less heat is lost in the manifold; in its V8 tests the exhaust ran at least 75 °C hotter at equal load. Which cylinders qualify depends on the manifold layout of the engine. No maker documents P2CDF publicly. GM's L84 uses P349C to flag a cylinder 5 that keeps breathing in normal operation, and the generic counterpart is P3434. If this code sets, the catalyst warms more slowly and cylinder 5 may misfire.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / DF

Possible causes

  • Deactivation lifter or rocker on cylinder 5 failing to lock or unlock high
  • Restricted oil gallery or screen feeding the switching elements of that bank medium
  • Faulty cylinder 5 control valve in the valve lifter oil manifold medium
  • Calibration issue in the engine control module low

Symptoms

  • Lamp on after cold starts, sometimes with a cylinder 5 misfire code
  • Ticking or tapping valve noise when cold
  • Rough idle until the engine is warm

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2CDF

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication