OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2CDE

Cold Start Cylinder 4 Deactivation/Intake Valve Control Performance

On a four-cylinder engine cylinder 4 is the last one in the count; P2CDE reports that cylinder 4 did not follow the cold start valve command. Engines may do two different things during a cold start. A Delphi patent closes the intake and exhaust valves of selected cylinders after start-up and reopens them once the converter is hot enough to work, around 350 °C. A Ford patent on latched rockers instead sets the valve state at key-on according to whether it is a cold or a warm start, for example deactivating intake valves to cut the air spring while cranking. Either way the controller must see the commanded state reached. No manufacturer documents P2CDE publicly; its normal-operation counterpart is P3426. Drivers notice a harsh start or a shaky first minute.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / DE

Possible causes

  • Switchable rocker or lifter on cylinder 4 not changing state high
  • Cylinder 4 solenoid drawing too little current due to corroded terminals medium
  • Aged or overdue engine oil impairing the hydraulic switching when cold medium
  • Implausible coolant or oil temperature signal triggering the cold start strategy wrongly low

Symptoms

  • Harsher cranking or start-up shake
  • Rough first minute after a cold start
  • Check engine lamp

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2CDE

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication