P2CDA
Alternative Fuel Tank A Vacuum Insulation Deteriorated
P2CDA concerns cryogenic fuel storage, in practice liquefied natural gas (LNG) and possibly liquid hydrogen, kept in a double-walled tank whose gap is evacuated. Once that vacuum softens, heat leaks in, the liquid boils faster and pressure climbs until the relief valve vents gas. Chart, a maker of LNG truck tanks, separates true vacuum loss from other causes by an eight-hour pressure rise test combined with an outer shell that feels cold or shows condensation. A Caterpillar patent lets the ECM compare pressure at key-off and key-on against a predicted rise and rate hold time, with under one day flagged as poor. No manufacturer documents this code publicly. The tank pressure sensor codes start at P019E. Expect shorter standing times before venting and lost fuel.
Possible causes
- Vacuum between inner and outer tank wall lost through a leaking weld, fitting or seal high
- Gradual vacuum decay from outgassing over years of service, tank due for pump-down medium
- Dent or impact damage to the outer shell breaching the insulation space medium
- Pressure rise from another cause (economizer, pressure regulator, sensor) misread as insulation loss low
Symptoms
- Tank pressure rises quickly while the vehicle stands, relief valve vents gas
- Frost or condensation on the outer tank shell
- Fuel loss and shorter standing time after refuelling
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2CDA
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.