OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2CD4

A/C Refrigerant Pressure Sensor A/B Correlation

P2CD4 is a plausibility check between two refrigerant pressure sensors that serve one A/C or heat pump circuit: the module flags it when the pair disagrees beyond what the system allows, even though each sensor is electrically fine. Bentley documents the code as P2CD400 in the thermal management ECU (address 00C5) of 2025 Continental GT and GTC models as well as the Flying Spur; campaign ED35 corrects its handling with a software update. In related Audi models, bulletin 87 22 35 shows that one to three combined pressure and temperature sensors sit on the high or low side of the loop, so A and B are maker-defined positions. No public threshold exists. Circuit faults of each sensor are P0530 ff. and P2515 ff. Expect limited compressor operation or weaker cooling.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / D4

Possible causes

  • Thermal management software misjudging the sensor comparison (Bentley 2025 campaign) high
  • One pressure sensor drifting or failing internally while still in range medium
  • Contact resistance at one sensor connector shifting its signal low

Symptoms

  • A/C cools weakly or the compressor is limited
  • Code stored in the thermal management or climate module

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2CD4

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication